Beaver Lake Striper tips and strategies

_________________________________________________________

Knot of the month
courtesy of Mike Bailey

The Snell Fishing Knot
The Snell Knot provides a strong connection when fishing with bait and using a separate length of leader. You can only use a Snell Knot with a leader.



1. Insert one end of the leader through the hook's eye, extending 1 to 2 inches past the eye.

Insert the other end of the leader through the eye in the opposite direction pointing toward the barb of the hook.

Hold the hook and leader ends between your thumb and forefinger of left hand. Leader will hang below the hook in a large loop.





2. Take the part of the large lower loop that is closest to the eye and wrap it over the hook shank and both ends of the leader toward the hook's barb.





3. Continue to wrap for 7 or 8 turns and hold wraps with left hand. Grip the end of the leader that is through the eyelet with your right hand and pull it slowly and steadily. Hold the turns with your left hand or the knot will unravel.

When knot is almost tight, slide it up against the eye of the hook. Grip the short end lying along the shank of the hook with a pair of pliers. Pull this end and the standing line at the same time to completely tighten the knot.




__________________________________________________________

SEASONAL TACTIC'S



Flatlines

Use flatlines or freelines to search for stripers holding near the surface or to pull active stripers from the depths. Flatlines consist of no weight or a single lead shot set about a foot above a single hook. Hook your biggest baits on flatlines to let the shad call stripers to them. Flatlines run within a few feet of the surface at 2 mph, but can be dropped to fish holding deeper by slowing the boat.




__________________________________________________________


FISHIN' REPORT